Semi SG-43 Crank Fire 7.62x54r SOLD

MrM4 · 03-17-2015, 03:59 PM

Up for grabs a Neanderthal Armory (Mechwarrior) built SG-43 with a Greg Clark Crank Fire unit.

New unfired since Marty at Neanderthal sent it to me, never got around to shooting it. Chambered in 7.62x54r Asking $3800 +$50 shiped. Please make sure you tell me where you saw it listed if calling.

605-457-2532 9-5 M-Sat

Check M/O or Card+3%

$3800

More pics can be provided if need be.

laxguy59 · 03-17-2015, 05:15 PM

Super cool

steamhead · 03-17-2015, 09:43 PM

Does the silly looking crank come off so that it will at least look like a real SG?

Frank

MrM4 · 03-17-2015, 09:47 PM

Yes if you wanted to shoot it with the spades the wheel can come off and you would be able to use the spades then.

DistalRadius · 03-18-2015, 11:59 AM

But doesn't it still require the box there to house the AR15 hammer and semi-auto parts? Thats the trick about SG-43 semis, theres almost no room whatsoever in the receiver for the necessary parts. IIRC Wiselite did theirs by extending the receiver rearward two inches.

Thats why my Gory semi reweld is not yet functional. Still trying to figure out how to fit a striker in there that has enough spring pressure but is still able to compress fully. I was lucky to get one of the Apex kits complete with the intact barrel, carriage, shield, and PP2 NVD. I'll have to get pics of it sometime, looks damn near museum grade so I'd hate to alter the receiver externally.

MrM4 · 03-18-2015, 12:09 PM

Digital is correct your fire control group is in the black box. The wheel or crank can be removed and then you could shoot it with the spades. As of now there's only 3 designs for semi SG I know of, Greg Clarks Crank Box like this, Wild Horses box that is also a AR hammer fired box and the stretched receiver from Wiselite.

I have not seen any semi SGs that do not have a box or a super long receiver.

MrM4 · 03-21-2015, 01:29 PM

Price cut from 4400 to 3800

Need this one gone, would take a 1919 kit plus cash.

MrM4 · 03-26-2015, 12:27 AM

SOLD

03-17-2015, 03:59 PM	#1
MrM4 Deep Creek Outfitters LLC Join Date: Aug 2010 Location: South Dakota Posts: 703 Rep Power: 7	Semi SG-43 Crank Fire 7.62x54r SOLD Up for grabs a Neanderthal Armory (Mechwarrior) built SG-43 with a Greg Clark Crank Fire unit. New unfired since Marty at Neanderthal sent it to me, never got around to shooting it. Chambered in 7.62x54r Asking $3800 +$50 shiped. Please make sure you tell me where you saw it listed if calling. 605-457-2532 9-5 M-Sat Check M/O or Card+3% $3800 More pics can be provided if need be. Last edited by MrM4; 03-26-2015 at 12:27 AM.

03-17-2015, 05:15 PM	#2
laxguy59 Senior Member Join Date: May 2012 Posts: 1,568 Rep Power: 9	Super cool __________________ Any zoo is a petting zoo if you're brave enough

03-18-2015, 11:59 AM	#5
DistalRadius Senior Member Join Date: Jun 2013 Location: TN Posts: 2,201 Rep Power: 27	But doesn't it still require the box there to house the AR15 hammer and semi-auto parts? Thats the trick about SG-43 semis, theres almost no room whatsoever in the receiver for the necessary parts. IIRC Wiselite did theirs by extending the receiver rearward two inches. Thats why my Gory semi reweld is not yet functional. Still trying to figure out how to fit a striker in there that has enough spring pressure but is still able to compress fully. I was lucky to get one of the Apex kits complete with the intact barrel, carriage, shield, and PP2 NVD. I'll have to get pics of it sometime, looks damn near museum grade so I'd hate to alter the receiver externally. __________________ "Nope; these days if you don't have a linkless cam that tilts the breech end of the barrel downwards and locks it to the ejection port and a machined slide with a single locking lug that forms the front of the firing chamber riding on a one-piece polymer frame with interchangeable backstraps and a striker-fired assisted DAO trigger mechanism, nobody will take you seriously." -LoudClankingSound

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2015, 09:43 PM	#3
steamhead Senior Member Join Date: May 2010 Location: east central Indiana Posts: 936 Rep Power: 17	Does the silly looking crank come off so that it will at least look like a real SG? Frank

03-17-2015, 09:47 PM	#4
MrM4 Deep Creek Outfitters LLC Join Date: Aug 2010 Location: South Dakota Posts: 703 Rep Power: 7	Yes if you wanted to shoot it with the spades the wheel can come off and you would be able to use the spades then.

03-18-2015, 12:09 PM	#6
MrM4 Deep Creek Outfitters LLC Join Date: Aug 2010 Location: South Dakota Posts: 703 Rep Power: 7	Digital is correct your fire control group is in the black box. The wheel or crank can be removed and then you could shoot it with the spades. As of now there's only 3 designs for semi SG I know of, Greg Clarks Crank Box like this, Wild Horses box that is also a AR hammer fired box and the stretched receiver from Wiselite. I have not seen any semi SGs that do not have a box or a super long receiver.

03-21-2015, 01:29 PM	#7
MrM4 Deep Creek Outfitters LLC Join Date: Aug 2010 Location: South Dakota Posts: 703 Rep Power: 7	Price cut from 4400 to 3800 Need this one gone, would take a 1919 kit plus cash.

03-26-2015, 12:27 AM	#8
MrM4 Deep Creek Outfitters LLC Join Date: Aug 2010 Location: South Dakota Posts: 703 Rep Power: 7	SOLD