Pkp bullpup concept - Page 2

Twinsen · 06-01-2022, 08:01 PM

https://en.zenitco.ru/catalog/machine-gun/b-25-u-rail/

Etsy has 3D printed ones for $15 that absolutely won't break immediately, but they are likely to break immediately because they're 3D printed and $15.

Hood886 · 06-01-2022, 08:06 PM

Quote:

Originally Posted by Twinsen

https://en.zenitco.ru/catalog/machine-gun/b-25-u-rail/

Etsy has 3D printed ones for $15 that absolutely won't break immediately, but they are likely to break immediately because they're 3D printed and $15.

image

Yeah idk I like it how it is. Never have been a fan of the canted grip, with all the weight being further back it makes it balance well. Now on the normal pkm I think the angles grip is decent.

Stan1 · 06-01-2022, 08:49 PM

Quote:

Originally Posted by Twinsen

https://en.zenitco.ru/catalog/machine-gun/b-25-u-rail/

Etsy has 3D printed ones for $15 that absolutely won't break immediately, but they are likely to break immediately because they're 3D printed and $15.

image

Yeah, the 3D filament printed stuff is weakest between layers. Looks like the one in the picture will snap at the thinnest part of the rail dovetail.

Twinsen · 06-01-2022, 08:56 PM

Or any place the infill is thin.

06-01-2022, 08:01 PM	#21
Twinsen Cheeki Breeki Moderator Join Date: Mar 2010 Location: Exclusion Zone Posts: 15,332 Rep Power: 76	https://en.zenitco.ru/catalog/machine-gun/b-25-u-rail/ Etsy has 3D printed ones for $15 that absolutely won't break immediately, but they are likely to break immediately because they're 3D printed and $15. __________________ Silencer Shop's eform 4 system is definitely working.

06-01-2022, 08:56 PM	#24
Twinsen Cheeki Breeki Moderator Join Date: Mar 2010 Location: Exclusion Zone Posts: 15,332 Rep Power: 76	Or any place the infill is thin. __________________ Silencer Shop's eform 4 system is definitely working.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode