|
07-27-2016, 03:00 PM
|
#121 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0  |
$100.00
Fairly labor intensive as it requires a second thread, slotting and deburring the Cup, welding the cup. |
|
|
|
08-05-2016, 01:05 PM
|
#122 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Good Novem 9mm video.
Video made by a customer, fairly long at seven minutes but really shows the difference ammunition makes.
Also note the clear difference in sound for sub-sonic even unsuppressed. And the lack of bolt slap, particularly when suppressed. |
|
|
|
|
08-05-2016, 01:55 PM
|
#123 |
|
Not A Clue
Join Date: Oct 2014
Location: East Tennessee
Posts: 2,341
Rep Power: 37  |
That is just ridiculous. About as loud as throwing rocks. Nicely done.
|
|
|
|
|
08-05-2016, 02:46 PM
|
#124 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Cannot REALLY judge sound via video, I know the YouTube algorithm really messes with mine when I post.
But it does seem that my Integral version clearly wins over a screw-on when shooting 115gr. Probably as I have so much more volume with my 1.5" ID x 16.0" long tube? |
|
|
|
|
08-05-2016, 02:49 PM
|
#125 | |
|
Senior Member
Join Date: Apr 2015
Location: Georgia
Posts: 2,824
Rep Power: 30 |
Quote:
__________________
Speak softly, and carry a big stick. |
|
|
|
|
|
08-05-2016, 06:43 PM
|
#126 | |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Quote:
Effective barrel length is about the same as a pistol to prevent velocity gain. I think it's the extra internal volume. Not much sound difference with subsonic but can be clear with supersonic. |
|
|
|
|
|
08-05-2016, 07:40 PM
|
#127 |
|
Expert Wannabe
Join Date: Jul 2014
Location: NW PA
Posts: 4,533
Rep Power: 45 |
I think the point he is making is that "supersonic ammo" may stay subsonic with a shorter barrel inside the integral.
This is why I bought an integral 10/22 with a ported barrel. The barrel is ported at about 4 inches to stop acceleration of the bullet. Any 22lr ammo becomes subsonic with the setup. The HK MP5SD does the same thing, stays subsonic with 115gr 9mm. |
|
|
|
|
08-05-2016, 10:56 PM
|
#128 |
|
Senior Member
Join Date: Apr 2015
Location: Georgia
Posts: 2,824
Rep Power: 30 |
Oh, yeah, I thought this integral was ported as well.
__________________
Speak softly, and carry a big stick. |
|
|
|
|
08-06-2016, 06:15 AM
|
#129 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
I do have an about 3" 9mm barrel for an AR-9 but beyond correcting the chamber and head-space I have never done anything with it.
My integral barrels are effectively the same length as normal pistol barrels since they are ported near the muzzle, but they are not over-ported to drop velocity like an MP5-SD. |
|
|
|
|
08-12-2016, 11:08 PM
|
#130 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Custom 9mm Novem Scout Rifle conversion with adjustable peep sights and scout rail.
A bit more work than I want to do as standard but the buyer was willing to pay the extra so he got his wishes. Top of the action had to be flattened and a support pad made for the front of the Picatinny rail. The rear sight grips the dove-tail, the Picatinny mounting is standard drilling and tapping except for the mounting pad. Front sight is mounted at the end of the suppressor cup for the longest possible sight radius. Most difficult part of this build was inletting the stock. If a standard barrel were used the front sight would have to be unusually tall. 
|
|
|
|
|
08-13-2016, 09:31 AM
|
#131 |
|
Molested by Nurses
Join Date: Jan 2010
Location: Texas
Posts: 5,753
Rep Power: 60 |
You just keep twisting my nipples, I'm wanting one of these.
__________________
If God didn't want them sheared, he would not have made them sheep.
 |
|
|
|
|
08-13-2016, 01:49 PM
|
#132 |
|
Senior Member
Join Date: Sep 2010
Posts: 2,817
Rep Power: 23 |
I really want one too, but I have too many irons in the fire right now. Maybe next year.
__________________
The core principle of freedom is the only notion to obey. |
|
|
|
|
11-16-2016, 06:21 PM
|
#133 |
|
Distinguished Rifleman
Join Date: Jan 2010
Location: Dixie
Posts: 12,580
Rep Power: 61 |
Another variant to tempt ya'll with. Here's a Scout version he did for a member on that forum.
__________________
“Bushido is all very well in its way, but it is no match for a 30-06.” Jeff Cooper |
|
|
|
|
12-30-2016, 07:51 PM
|
#134 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Been a busy morning.
Some gun-porn for you. 
|
|
|
|
|
12-30-2016, 08:33 PM
|
#135 | |
|
Forum Flunky, Admin
Join Date: Dec 2009
Posts: 7,809
Rep Power: 54 |
Quote:
__________________
Anonymous: "No company could possibly destroy their image and alienate 1/2 their customers faster than the NFL did." Gillette: "Hold my beer" |
|
|
|
|
|
12-31-2016, 12:02 PM
|
#136 |
|
Rimfire revivalist
Join Date: Jun 2010
Location: SNH
Posts: 659
Rep Power: 8 |
Richard,
Any chance of adapting one of these to take Glock 9mm mags? |
|
|
|
|
01-29-2017, 03:46 PM
|
#137 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Basic Novem 9mm $750.00 and actual shipping.
No chance of making Glock mags fit. Standard RIA mags in 5 and 17 round capacity. Just completed a suppressed Novem 9mm with a synthetic stock. Pics below. Factory .22 TCM's with synthetic stock are supposed to be available later this year. They will come with a bipod, scope rail, and threaded barrel. Not sure of the thread but I would expect 1/2-28. They will also be higher priced than the standard wood stock guns.  
|
|
|
|
|
01-29-2017, 10:52 PM
|
#138 |
|
07/02FFL AR. CHL Instr.
Join Date: Mar 2011
Location: Arkansas
Posts: 243
Rep Power: 7 |
Where did you get that synthetic stock?
I like it.
__________________
07/02 FFL. Maker of cool stuff |
|
|
|
|
01-29-2017, 11:01 PM
|
#139 |
|
Molested by Nurses
Join Date: Jan 2010
Location: Texas
Posts: 5,753
Rep Power: 60 |
I would like to see Boyds come out with one if their tactical stocks for it and I would probably jump on it.
__________________
If God didn't want them sheared, he would not have made them sheep.
|
|
|
|
|
01-29-2017, 11:10 PM
|
#140 |
|
Member
Join Date: Apr 2015
Location: Gardnerville, No. Nevada. Fifty miles south of Reno.
Posts: 77
Rep Power: 0 |
Factory RIA TCM stock.
Obtained as a replacement for a wood stock that cracked. They will be factory fit to TCM Tactical version that is supposed to become available this year. I doubt that Boyds will ever offer TCM stocks as it's a narrow market and they do not seem to like narrow markets anymore. But, they do offer a few generic profiles without any inletting. In theory I could buy those and inlet them on one of my CNC's using the the surplus wood stock to create the G-code. Question becomes weather or not that would really make sense for me to do anymore than it does for Boyds? |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
